• Register
0 votes

Problem :

Today morning when I wanted to start my work I came across below error message.

Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188

Any solution on above error message?

7 5 2
3,870 points

Please log in or register to answer this question.

2 Answers

0 votes

Solution :

Some of the possible causes for above error message can be due to the user’s display drivers are not working correctly, a maximum file size of a Startup Event Trace Sessions being too small and users affected computer’s SETUP.ETL file being corrupt. To help resolve your issue, I suggest that you should try below method:

Increase your maximum files size of your Startup Event Trace Sessions.

1. On your desktop, please try to press Windows key + R and after that type cmd to open your Command Prompt.

2. On your left panel of your Performance Monitor window, please try to expand Data Collector Sets.

3.  After that please click on the Startup Event Trace Sessions.

4. Open your ReadyBoot Trace Session Property Sheet.

5. Click on your Stop Condition tab and also try to increase your Maximum Size to 40.

6. Click on the Apply and OK.

Finally just try to Restart your computer and check if your issue is resolved.

Hope this solves your issues.

9 7 4
38,600 points
0 votes


1: Ensure that the Superfetch service is enabled and running

You might be viewing a horde of “SessionCircular Kernel Context Logger’ Stopped Due to the pursuing Error: 0xc0000188” error messages in your computer’s Event Viewer since a service known as Superfetch is, for few cause, disabled or otherwise not running on your computer. In case that’s the cause why you’re experiencing this problem, all you require to do in order to get rid of it and never view this ugly error message ever again is ensure that the Superfetch service is not only enabled however is also running. To employ this solution to attempt and resolve this problem, you require to:

  1. Hit the Windows Logo key + R to open a Run dialog.
  2. Type services.msc into the Run dialog and hit Enter
  3. In the Services manager, scroll down and allocate the Superfetch service, right-click on it and click on Properties.
  4. Open the dropdown menu in front of the Startup type: field and click on Automatic to choose it
  5. In case the service was not meanwhile running, click on Start to start running it. In case the service was meanwhile running, easily skip this step and move on to the next one.
  6. Click on Apply and then on OK.
  7. Close the Services manager and restart your computer.

At the time the computer boots up, continue employing it and check to view whether or not the problem still persists.


2: Increase the maximum file size of the Startup Event Trace Sessions

As explained before, another quite usual reason of Windows users losing their display and having “Session ‘Circular Kernel Context Logger’ Stopped Due to the pursuing Error: 0xc0000188” error messages in their Event Viewer is the size of the Startup Event Trace Sessions not being adequate. In case that’s the case, easily raise the maximum file size of the Startup Event Trace Sessions must resolve the problem for you. To do so, you require to:

  1. Open the Start Menu.
  2. Seek for “cmd“.
  3. Right-click on the search result titled cmd and click on Run as administrator to launch an elevated example of the Command Prompt that has administrative privileges.
  4. Type the following into the elevated Command Prompt and press Enter: perfmon
  1. The Performance Monitor must now show up on your screen. In the left pane of the Performance Monitor, double-click on Data Collector Sets to extend it.
  2. Click on Startup Event Trace Sessions beneath Data Collector Sets.
  3. In the right pane of the Performance Monitor, allocate the ReadyBoot entry and double-click on it.
  4. Navigate to the Stop Condition tab and replace whatever is in the Maximum Size field with 40.
  1. Click on Apply and then on OK, close the Performance Monitor, close the elevated Command Prompt and restart your computer.

Check to view in case the problem has been resolved at the time your computer boots up.

3: Make your computer replace the SETUP.ETL file with a fresh copy

In case neither of the solutions listed and described above have performed for you, you can still attempt a hail Mary – outrage your computer to replace the SETUP.ETL file with a fresh copy. A corrupt SETUP.ETL file can also, in many instances, be the incident of this problem, hence creating your computer replace its present SETUP.ETL file with a fresh one must take care of any corruption or other damage inflicted upon the old file. To create your computer replace its present SETUP.ETL file with a fresh one, you require to:

  1. Hit the Windows Logo key + R to open a Run dialog
  2. Type pursuing into the Run dialog and hit Enter:
  3. In the example of Windows Explorer that pops up on your screen, allocate a file titled setup.etl, right-click on it and click on Rename.
  4. Rename the file to setup.old and hit Enter to ensure the action.
  5. In case asked whether you’re certain regarding altering the file’s extension, ensure the change.
  6. Restart your computer. At the time the computer boots up, it will automatically make a new SETUP.ETL file, fully disregarding the old one that you renamed. At one time this is done, inspect to view in case this solution managed to resolve this problem for you.
10 6 4
31,120 points

Related questions

0 votes
2 answers 82 views
Problem : Currently I am using Windows Server 2008 R2. I usually connect the server by remote desktop connection. But nowadays my server disconnects my remote desktop session randomly and also all my application running during the session are closed. My issue is ... microsoft security client' oobe stopped due to the following error: 0xC000000D Why my Windows Server 2008 R2 behaving like that?
asked Dec 2, 2019 alecxe 7.5k points
0 votes
1 answer 3 views
Problem: please help, I get the following message when I run my application: log4j:WARN No appenders could be found for logger (dao.hsqlmanager). log4j:WARN Please initialize the log4j system properly. log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info. What do these warnings mean? What's the appender here?
asked Mar 15 ummesalma 22.9k points
0 votes
1 answer 4 views
Problem: I have some problem regarding this, if anyone know it's solution then answer me.
asked Apr 4 niyatiry 2.9k points
0 votes
1 answer 20 views
the kernel power manager has initiated a shutdown transition.
asked Feb 16 ArifulIslam 7.5k points
0 votes
1 answer 35 views
Problem: the kernel power manager has initiated a shutdown transition.
asked Feb 16 Ethan ross 2.3k points
0 votes
1 answer 151 views
Problems: Can anyone give the right solution? The Windows kernel includes what two main components?
asked Feb 14, 2020 maddi86 5.4k points
0 votes
1 answer 7 views
Problem: Do you have any suggestions about how I can resolve this “Windows has stopped this device because it has reported problems. (code 43) how to fix”?
asked Mar 30 tuhin1 47.2k points
0 votes
2 answers 1.9K views
Problems: I am new to computers, I need help, can anyone help me? What would you enter at the command prompt to start a new Bourne-again shell (bash) session?
asked Feb 13, 2020 maddi86 5.4k points
0 votes
1 answer 11 views
Problem: i am unable to recover from a kernel exception.
asked Mar 18 waseem memon 2.4k points