• Register
110,660 points
12 7 5

The Innovage Jumbo Universal Remote Control is a device that can operate multiple electronic systems with a single control. It supports cable, television, VCR, DVD, and satellite systems. The remote control takes only a few minutes to set up and has the ability to accept entry or page codes for different devices.

Direct code entry

The Innovage universal remote controls multiple devices once you enter a code for specific devices. The instruction manual contains hundreds of codes for the most popular device manufacturers. If you know the make and model of the device you want to control, consult the instruction manual to find the correct code.

To enter the code into the remote control, turn on the device you want to add. Point the controller at the device and press and hold the "code search" button until the LED is solid red. Press the button for the device you want to configure, for example "TV" or "DVD." The light blinks once and then remains solid red. Use the number buttons to enter the first code associated with your device. Once done, the LED light will turn off. Point the remote control at the device and press the "On / Off" button. If the device turns off, the code is correct. If the device does not turn off, repeat the steps above using the next code in the list.

Code search

It may be that the manufacturer of the device you want to add to the remote control does not appear in the instruction manual or that you do not have access to the manual to find the codes. Jumbo universal remotes have an automatic code search that will scroll through each of the codes until it finds the correct one for your device.

To use the code search, turn on the device you want to configure. Point the remote at it and press and hold the "code search" button until the light is solid red. Press the corresponding button for the device you want to install, such as "TV" or "DVD." With the remote control pointed at the device, repeatedly press the "On / Off" button. Keep doing this until the device turns on. When it turns off, press the "Enter" key to configure the control. Use the "On / Off" option and see if the device turns on again. If it does, the setting is complete. If not, try the code search again and make sure you hit the "Enter" button.

Using the remote control

The buttons on the Jumbo universal remote control are similar to the types of buttons found on standard remote controls. The buttons have the same labels, making the transition to a different control easy. The remote does not require you to press the button on the device you want to control before trying to do so. For example, if you want to use the DVD player, press the "DVD" button before using any of the other buttons.

 

110,660 points
12 7 5